Victron Skylla-i Battery Charger (100A / 24V)

 

Part No: VC-SKI024100002

The main features of the Skylla-i are that is has synchronised parallel operation which means several chargers can be synchronised with the CAN bus interface. This battery charger also has a BatterySafe mode which prevents damage due to excessive gassing, Storage mode is also available which after 24 hours of non-use the float voltage will be reduced to 2.2V.

This Victron charger has a temperature sensor which lowers the charge voltage as the temperature increases and has battery voltage sense which compensates for loss due to cable resistance by using a voltage sense facility to ensure the battery always gets the correct charge voltage.

The Skylla-i is suitable for AC and DC supply and can also be used as a power supply.

You can find the specifications of this battery charger below:

Skylla-i (24/100 - 3)

- Input voltage: 230V AC

- Input voltage range: 185V to 265V AC

- Input voltage range: 180V to 350V AC

- Maximum AC input current at 180V AC: 20A

- Frequency: 45-65 Hz

- Power factor: 0.98

- Charge voltage 'absorption': 28.8V DC

- Charge voltage 'float': 27.6V DC

- Charge voltage ‘storage’: 26.4V DC

- Charge current: 3 x 100A

- Charge algorithm: 7 stage adaptive

- Battery capacity: 500-1000 Ah

- Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control

- Temperature sensor: Yes

- Can be used as power supply: Yes

- Remote on-off port: Yes (can be connected to a Li-Ion BMS)

- CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, galvanically isolated

- Synchronised parallel operation: Yes, with VE.Can

- Alarm relay: DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC

- Forced cooling: Yes

- Protection: Battery reverse polarity (fuse) Output short circuit Over temperature

- Operating temp. range: -20°C to 60°C (Full output current up to 40°C)

- Humidity (non-condensing): Max 95%

- Enclosure:

Material & Colour: Aluminium (Blue RAL 5012)

Battery-connection: M8 bolts

230 VAC-connection: Screw-clamp 10mm² (AWG 7)

Protection category: IP 21

Weight: 7 kg (16 lbs)

Dimensions: Height 405mm x Width 250mm x Depth 150mm

- Standards:

Safety: EN 60335-1, EN 60335-2-29

Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2

Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

 

Approvals	Safety: EN 60335-1, EN 60335-2-29 Emmission: EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Capacity Description	Battery Capacity: 500-1000 Ah
Height Description	405mm
Operating Temperature	-20°C to 60°C (Full output current up to 40°C)
Rating	IP21
Voltage Description	Input Voltage (VAC): 230V / Input Voltage Range (VAC): 185-265V / Input Voltage Range (VDC): 180-350V
Width	250mm
Brand	Victron
Charger Outputs	3
Frequency Description	45-65 Hz
Amps Description	Charge Current: 100A, Maximum AC input current at 180 VAC: 20A
Depth	150mm