All About Boats
Rule 53S 2000 Automatic Submersible Bilge Pump (12V / 126 LPM / 28mm)
Rule 53S 2000 Automatic Submersible Bilge Pump (12V / 126 LPM / 28mm)
Couldn't load pickup availability
Rule 53S 2000 Automatic Submersible Bilge Pump (12V / 126 LPM / 28mm)
Part No: 504116
Rule 53S 2000 Automatic submersible bilge pump with a flow rate of up to 126 LPM (33 GPM).
The Rule automatic bilge pump turns on and checks for water every 2 1/2 minutes, during this check the pump runs for approximately 1 second and checks for resistance or drag against the impeller. If resistance is encountered, it will run until water is no longer present.
The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.
The Rule 2000 range of small submersible bilge pumps are recommended for discharge heads up to a maximum of 3 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.
| Approvals | ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification |
| Flow Rate Description | 7570 LPH (2000 US GPH) |
| Flow Rate 1 Metre Head | 6132 LPH (1620 US GPH) |
| Fuse | 15A |
| Height Description | 197mm (7.75"), Switch cut in height: 38mm (1.5") |
| Outlet | 28mm (1-1/8") ID Hose |
| Series | Rule 2000 |
| Voltage Description | 12V DC |
| Brand | Rule |
| Automatic Bilge Pumps | Yes |
| Maximum Pump Head | 2.3 to 4.27 Metres |
| Warranty | 3 Years |
| Diameter Description | Base: 120mm |
| Flow Rate 2 Metre Head | 4921 LPH (1300 US GPH) |
| Hose Size | 28mm / 1-1/8" |
| Maximum Recommended Head | 3 Metres (9.8 Feet) |
| Model | 53S |
| Amps Description | 8.4A at 12V, 12A at 13.6V |
Share
