Raptor Tough Protective Coating 3.8L Kit Black with Applicator Gun

Part No: UPL.RLB/S4-G

Raptor is an ultra-tough textured coating that provides maximum protection to surfaces and provides a great looking finish too! It can be applied using a Schutz gun, HVLP gun, roller or brush. Typical above waterline applications include - decks, gunnels, engine bays, lockers, consoles, freeboard, canopies and transom.

Kit contents:

4 x 711ml Raptor Protective Coating (Black)

1 x 946ml Raptor Hardener

1 x Raptor Schutz Spray Gun

1 x Measuring cup

The two-part urethane Raptor formula creates a tough, water-resistant barrier that protects surfaces from impact, scratches, corrosion, chemical spillages, fuels, fresh and salt water, UV and more.

Raptor is highly suitable for use in the harshest of marine environments, making it suitable for both marine leisure and commercial applications.

Raptor coatings can be applied to original paint, aluminium, bare or galvanised metal, polyester fillings, most plastics, fiberglass, GRP, SMC, E-coat, concrete and wood. Some substrates require additional surface preparation before application - please see the Technical Data Sheet or contact us for support.

Raptor has passed flammability testing according to the test methods FMVSS 302, ISO 3795 and BS AU 169A. And when used with Raptor Traction Anti-Slip Additive, product code UPL.RTLTR/SM it produces a anti-slip finish conforming to BS 7976-2.

- Touch Dry at 20°C (68⁰F): Less than 1 hour

- Through Dry at 20°C (68⁰F): 5-7 days

Raptor can be baked for 30 minutes at 60°C (140⁰F). Baking will speed up the initial cure, but it is still recommended waiting 7 days for regular use.

Raptor coverage is approximately 3m2 per litre at the recommended film build, coverage determined by method of application*