All About Boats
R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud)
R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud)
Couldn't load pickup availability
R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud)
Part No: 207003
The compression flexible engine mounting is a low height mount with minimum deflection.
Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more.
Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375").
If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm.
The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing.
| Application | 2 & 3 Cylinder Long Stroke Engines, 4 Cylinder Engines, 6 Cylinder & Over Engines |
| Capacity Description | 180 lbs |
| Height Description | 116mm (4.57"), Base: 44.5mm (1.75") |
| Length | 130mm (5.13") |
| Maximum Load Description | 45kg to 82kg (100lbs to 180lbs) |
| Width | 76mm (3") |
| Brand | R&D Marine |
| Hole Centres | 101.6mm (4") |
| Suitable For | 2 & 3 Cylinder Long Stroke Engines|4 Cylinder Engines|6 Cylinder & Over Engines |
| Country of Origin | United Kingdom |
| Engine Mount | Compression Engine Mounts |
| Deflection | 2.3mm (0.09") |
| Dimensions | Height Adjusting Nut Thickness: 14mm (0.55") |
| Mount Pre loaded | 1.5mm (0.06") |
| Stud Size | 5/8" UNF |
Share
