R&D Drive Plate For PRM101, 160, 260 (10 Teeth Spline / 362mm OD)

Part No: RND-45AN89

45AN89 R & D Marine Damper Drive Plate.

Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 45AN89 Damper Drive Plate is from the R and D High Deflection element range. Common applications for the 45AN89 drive plate include Ford engines mated to gearbox models PRM100, PRM101, PRM140, PRM160 & PRM260, subject to flywheel dimensions.

The technical details:

- Spline: SAE 1" x 10 teeth (25.4mm diameter) for PRM100, 101, 140, 160 & 260 gearboxes

- Diameter of back plate which bolts to the engine flywheel: 362mm (14.25")

- Back plate fixing holes (multi-hole fixing type): 6 x 8.1 on 200mm pcd, 6 x 8.1mm on 210mm pcd, 6 x 8.1 on 263mm, 6 x 8.1 on 26.9mm pcd, 6 x 8.1 on 276.3mm pcd, 6 x 8.1mm on 289mm pcd, 6 x 8.1mm on 295.3mm pcd, 6 x 8.8mm on 304.8mm pcd, 6 x 8.1mm on 314.4mm pcd, 6 x 9.5 on 320.7mm pcd, 12 x 9.5mm on 343mm pcd.

- Maximum thickness of drive plate: 35mm (1.38")

Fitted with the softer type AN high deflection element for 270Nm 200 ft lb torque, providing a maximum deflection up to 30 degrees. This type of drive plate is especially suited to workboats with slow speed applications & pleasure boats. Note that this type of damper drive plate can only be fitted to rotate in the standard direction of rotation (anti-clockwise when looking at the flywheel) with the drive plate element facing the gearbox. These damper plates are also failsafe.

If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.