Jabsco Neoprene Pin Drive Pump Impeller (6 Blades, 40mm OD x 19mm W)

 

Part No: JAB-4528-0001-P

This impeller is for the following Jabsco pumps: 11260-200, 11260-205, 11260-2101, 11260-211, 11260-2151, 11260-2211, 11430-01, 11620-200, 11620-211, 11650-200, 17120-0001, 21130-200, 21130-200, 21130-2101, 21130-2101, 22230-200, 22230-200, 22350-200, 22350-200, 22820-2051, 22820-2101, 22830-2001, 22830-2051, 22830-2101, 22830-2151, 22830-2201, 22830-2301, 22940-2001,22940-2051, 22960-1001,22960-2001, 2760-0001, 29350-1001, 29350-1101, 4530-0001, 4780, 6640-200, 6640-205, 9360, 9430, 9430-01, 9430-21, 9430-211, 9430-51, 9560, AL 1/4"-200 and AL 1/4"-204.

The Jabsco 4528-0001-P flexible neoprene impeller has 6 impeller blades, a slotted shaft pin drive and is supplied as an impeller kit, with gasket and lubricant.

The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present.

The Jabsco 4528-0001-P Flexible Neoprene Impeller replaces the following Impellers:

- Jabsco impellers: 4528-0001B & 4528-0003B

- Johnson impeller: 09-806B

- Volvo Penta impellers: 803729, 875807-0 & 876554-7

- Perkins impeller: 24990272

- Onan impeller: 132-0859

- Sherwood impeller: 9979

- Yanmar impeller: 104211-42070

- Orbitrade Marine impeller: 8-24001

This impeller is also for use with the following marine engines:

- Volvo Penta: MB10A, MD1, MD1A, MD1B, MD1KDH, MD1KDHY, MD1KDHY2, MD2BHY, MD6A, MD6B, MD7A, MD7B, MD2010 and MD2020.

- Yanmar: 2GM20, 2GM20B, 2GM20C, 2GM20VE, 2QM (bilge pump), 2QM15, 2QM20 (bilge pump), 3GM, 3GMD, 3GM30, 3GM30B, 3GM30C, 3GM30VE, 3QM (bilge pump), 3QM30 (bilge pump), SB8, SB8-CY, SB8-EX, SB8G-CY, SB8G-EX, SBF8, SBF8G, YSB8, YSB8-CY, YSB8-ECX, YSB8-R, YSB8G-CY, YSB8G-ECX, YSB8G-R, YSBF8, YSBF8G, YSE8, YSE8L, YSM8, YSM8-J, YSM8-R, YSM8-Y, SB12, SB12-CY, SB12-EX, SB12G-CY, SB12G-EX, SBF12, SBF12G, YSB12, YSB12-CY, YSB12-ECX, YSB12-R, YSB12G-CY, YSB12G-ECX, YSB12G-R, YSBF12, YSBF12G, YSE12 and YSE12L.

Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance.

This Impeller has a D profile.

 

Application	See Description
Material	Neoprene Impeller with Brass insert
Brand	Jabsco
Primary Construction	Neoprene
Suitable For	Onan|Perkins|Volvo|Yanmar
Impeller Shaft Diameter	9.5mm
Number of Impeller Blades	6
Profile	D
Diameter Description	40mm (9/16"), Shaft: 9.5mm (3/8")
Drive Type Description	Through Pin Drive
Model	4528-0001-P
Replaces	Jabsco: 4528-0001B & 4528-0003B, Johnson: 09-806B, Volvo Penta: 803729, 875807-0 & 876554-7, Perkins: 24990272, Onan: 132-0859, Sherwood: 9979, Yanmar: 104211-42070.
Depth	19mm (3/4")